鋼背涂膠機

鋼背滾膠機介紹：設備采用雙硅膠輥滾涂鋼背膠水，雙膠輥滾涂保證了滾涂的均勻性，涂層厚度在20-30微米。彌補了單膠輥涂抹不均勻漏涂膠的問題。涂抹過程中不會出現鋼背的側面及背面有膠的情況，生產效率30-50片每分鐘，變頻器速度可調。

產品優勢：相對于傳統鋼背噴膠處理能節省膠水百分之70以上，膠水利用率可以做到接近百分百。使用過程中不會有廢膠產生，更利于環保，無堿液等危廢產生。減少了公司對于處理這等問題處理過程。本設備可以做到一人操作，10分鐘就可以完成培訓上崗，操作簡單，維護方便。膠輥的使用壽命更是長達150萬-200萬片。

Steel back glue coating machine

Introduction to the steel back glue coating machine: The equipment uses double silicone rollers to apply steel back glue. The double silicone rollers ensure the uniformity of the roller coating. The coating thickness is 20-30 microns. It makes up for the defect of uneven application and leakage of glue by a single silicone roller. During the coating process, there will be no glue on the sides and back of the steel back. The production efficiency is 30-50 pieces per minute, and the conveyor belt speed is adjustable.

Product advantages: Compared with traditional glue spraying, it can save more than 70% of glue, and the glue utilization rate can be close to 100%. No waste glue will be produced during use, which is more environmentally friendly and no hazardous waste such as alkali liquid will be produced. This equipment can be operated by one person, and training can be completed in 10 minutes. It is simple to operate and easy to maintain. The service life of rubber rollers is as long as 1.5 million to 2 million pieces.